VOLVO
ECM-P132C00 - Turbocharger/Supercharger Boost Control A Voltage. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM drives the turbo control motor with a PWM signal. The code is set when the module sees a fault in the boost-control signal, and in this case the cause is an open circuit in the power supply. It gives no further fault type.
Mulige årsaker
- Open circuit in the power supply
Hva du kan gjøre
- 1Check that the fuses for the boost control are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check the connectors to the turbo control motor so they are secure and free from corrosion.
- 3Look for broken or chafed wires in the supply to the turbo control motor.
- 4Have a workshop measure the supply voltage to the turbo control motor with diagnostic equipment, as the measurement is made with the ignition on.
Symptomer du kan merke1
- Poor performance, the car lacks power
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.