Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P133009
    VOLVO

    ECM-P133009 - Injector Control Pressure Lower Than Desired (engine running). General Failure Information. Component Failures

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: D4204T5
    • Volvo V40 (2013–)2015Kun motor: D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: D4204T5

    Hva betyr feilkoden?

    This code concerns fuel pressure on the high-pressure side when it is lower than desired. The engine control module checks the deviation with the engine running, and the correct pressure depends on engine load and speed. The causes lie in the fuel system: fuel starvation on the low-pressure side, leaks, a blocked filter, air, or damaged control valves.

    Mulige årsaker

    • Waxing of diesel at low fuel temperatures
    • Internal or external fuel leak on the high-pressure side
    • Poor fuel supply on the low-pressure side
    • Blocked fuel filter
    • Damaged fuel flow control valve or fuel pressure control valve
    • Air in the fuel system

    Hva du kan gjøre

    1. 1Check how much fuel is in the tank. If it is low, top up.
    2. 2Deal with any fault codes for the fuel pump first.
    3. 3Check that the fuel system is not leaking and that the fuel filter is not blocked.
    4. 4With a diagnostic tool, follow the fuel pressure in live data at idle and see whether it deviates from the requested value.
    5. 5Have a workshop check the control valves, the tightness of the injector valves and the pressure sensor connectors and wiring, using measurements.

    Symptomer du kan merke5

    • The engine does not start, but the starter motor turns
    • Poor performance, the car lacks power, especially when pulling away from a standstill
    • Uneven idle
    • The engine stalls, both at idle and while driving
    • Text message and warning symbol in the display

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.