VOLVO
ECM-P133668 - Crankshaft/Camshaft Sensor Range/Performance. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This is an event-controlled information code. It does not indicate a fault in the engine control module but is intended as information, and it disappears by itself when the conditions no longer apply. The module verifies the camshaft's position against the crankshaft's position. The fault can be due to a camshaft set incorrectly after a timing belt change, a camshaft fitted wrongly, or a damaged camshaft.
Mulige årsaker
- Incorrectly adjusted camshaft after timing belt replacement
- Incorrectly installed camshaft
- Damaged camshaft
Hva du kan gjøre
- 1This is a knock-on fault. Deal with any other fault codes first.
- 2If the timing belt was recently replaced, the camshaft position may be wrong. Have a workshop check it.
- 3The code does not need clearing in advance. It disappears when the conditions no longer apply.
- 4If the code is still present once the other faults are dealt with, have a workshop check the camshaft.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.