VOLVO
ECM-P133695 - Crankshaft/Camshaft Sensor Range/Performance. Component Failures. Incorrect assembly
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The code concerns the position of the intake camshaft relative to the crankshaft. The engine control module (ECM) compares the camshaft position with the crankshaft position and sets the code when the camshaft is incorrectly adjusted after a timing belt change. The fault is noticed at start attempts, when the engine is to be started.
Mulige årsaker
- Incorrectly adjusted camshaft after timing belt replacement
- Incorrectly installed camshaft
- Damaged camshaft
Hva du kan gjøre
- 1Remember that a camshaft adaption is a workshop task, and it should be done first when camshaft faults are stored.
- 2If you have a diagnostic tool, read the code before and after the workshop work, so you can see whether the fault has gone.
- 3If the timing belt was recently replaced, tell the workshop, since a camshaft set wrongly after a belt change can cause the fault.
- 4If the fault remains, have a workshop check that the intake camshaft is correctly fitted and undamaged.
Symptomer du kan merke2
- The Check engine (malfunction) lamp comes on or behaves abnormally
- The engine does not start, and when the fault shows is unclear
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.