VOLVO
ECM-P134600 - Fuel Level Sensor B Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (22)
- Volvo S60 (2011–)2011–2014Kun motor: B6304T4
- Volvo S60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo V60 (2011–)2011–2014Kun motor: B6304T4
- Volvo V60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2014Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B6304T4
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The central electronic module (CEM) detects a fault on the ejector part of the fuel level sensor and sends a fault message to the engine control module (ECM), which then sets the code. The code is therefore a knock-on fault, and the root fault is in the CEM.
Mulige årsaker
- The cause of the fault is in the central electronic module (CEM)
Hva du kan gjøre
- 1Read the codes in the central electronic module (CEM), because the root fault is stored there.
- 2Remedy the root fault in the CEM and then clear the code there.
- 3Then clear the code in the engine control module (ECM). It cannot be cleared until the root fault has been remedied.
- 4If nothing is found in the CEM, have a workshop with diagnostic equipment check the ejector part of the fuel level sensor and its wiring.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.