VOLVO
ECM-P140200 - Exhaust Gas Recirculation Metering Orifice Restricted. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module (ECM) monitors the EGR control, that is the exhaust gas recirculation. The code is set when the module registers a fault in the EGR valve or its wiring that gives incorrect EGR control. The fault can come from poor contact, a short or open circuit in the wiring, a sticking EGR valve, or a damaged EGR valve.
Mulige årsaker
- Poor contact, contact resistance or oxidation at the EGR valve connectors
- Short circuit to supply voltage in the wiring to the EGR valve
- Short circuit to earth in the wiring to the EGR valve
- Open circuit in the wiring to the EGR valve
- The EGR valve seizes or has jammed
- Damaged EGR valve
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check the connectors to the EGR valve. They should be secure and free from oxide.
- 3Look for broken, chafed or pinched wires to the EGR valve. They may have shorted to earth or supply voltage.
- 4Look for soot and dirt around the EGR valve, as it can seize or jam.
- 5Have a workshop with diagnostic equipment check the EGR valve and its wiring, and replace the valve if it is damaged.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.