Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P141200
    VOLVO

    ECM-P141200 - Exhaust Gas Recirculation Valve Frozen. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
    • Volvo S80 (2007–)2010–2011Kun motor: D4164T
    • Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
    • Volvo V70 (2008–)2010–2011Kun motor: D4164T
    • Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
    • Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
    • Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5

    Hva betyr feilkoden?

    The engine control module (ECM) monitors the position sensor of the EGR valve and sets the code when the valve does not move to the position the module has requested. The causes are a sticking or damaged EGR valve, poor contact, dirt or soot, or an open or short circuit in the wiring to the valve. The exhaust gas recirculation (EGR) control is switched off.

    Mulige årsaker

    • Sticking EGR valve
    • Damaged EGR valve
    • Poor contact, contact resistance or oxidation at the EGR valve connectors
    • The EGR valve seizes from dirt or soot
    • Open circuit in the wiring to the EGR valve
    • Wiring to the EGR valve shorted to earth or supply voltage

    Hva du kan gjøre

    1. 1Check that the fuses are intact.
    2. 2Go through the connectors to the EGR valve. They should be secure and free from oxide.
    3. 3Look for breaks in the wiring to the EGR valve, and for chafing that may have shorted it to earth or supply voltage.
    4. 4If you have a diagnostic tool, you can activate the EGR valve and check that it does not bind.
    5. 5Have a workshop measure at the connector to the engine control module, as this needs measurements.

    Symptomer du kan merke1

    • The Check engine (malfunction) lamp comes on or behaves abnormally

    Hva feilen kan påvirke2

    • EGR control is switched off
    • Engine output is limited

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.