Hva betyr feilkode ECM-P150000?

Diagnose og feilkodedefinisjon for ECM-P150000 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P150000 - Vehicle Speed Sensor. General Failure Information. No sub type information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

3 modeller

S60 (2011–), S80 (2007–), V70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

Although the code is named as a vehicle speed sensor, it applies to the speed value sent by the brake control module (BCM). The engine control module (ECM) compares that value with engine speed when the fuel supply is cut off, for example during engine braking. The code is first set in the brake control module and can only be cleared once the fault there has been corrected.

Mulige årsaker

Wrong speed value sent by the brake control module (BCM)

Hva du kan gjøre

1Check that the wheel sensors are clean, as dirt on them can give too low a speed signal.
2Check whether the brake control module (BCM) has its own fault codes for the speed signal, and correct those first, since this code follows them.
3If you have a diagnostic tool, read the speed value sent by the brake control module in live data during a test drive, and compare it with the speedometer.
4Clear the code only once the fault in the brake control module has been corrected, and check that it does not return.
5Do not work on the braking system yourself. If the fault remains, have a workshop check it.

Symptomer du kan merke2

The eco lamp is lit
The speedometer shows an incorrect value

Hva feilen kan påvirke2

With a manual gearbox, the speed signal is set to a default value
With an automatic gearbox, a secondary speed signal from the transmission control module (TCM) is used

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.