VOLVO
ECM-P155200 - Cylinder 2 Injector Circuit Range/Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S80 (2007–)2007Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2008–2009Kun motor: D4204T, D5244T4, D5244T5
- Volvo S80 (2007–)2010Kun motor: D4204T
- Volvo V70 (2008–)2008–2009Kun motor: D4204T, D5244T4, D5244T5
- Volvo V70 (2008–)2010Kun motor: D4204T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The code concerns the injection valve on cylinder 2. The engine control module (ECM) monitors the signal to the valve and its output stage as well as the injection quantity, and sets the code if something is wrong, for example if the quantity becomes too large.
Mulige årsaker
- Contact resistance or corrosion in the connectors and connections
- Loose connector
- Open circuit in the signal wire, or in the positive or negative wire
- With fault code ECM-P120212: the signal wire is shorted to voltage, or the injection valve is damaged
- With fault code ECM-P120211: a short between the signal wires, or the signal wire is shorted to ground
Hva du kan gjøre
- 1Cylinder 2 is the second cylinder counted from the right-hand side of the vehicle, with cylinder 1 furthest from the flywheel.
- 2Check that the fuses are intact. Their location is in the owner's manual or on the fuse box cover.
- 3Check the connector to the cylinder 2 injection valve for looseness, contact resistance and corrosion.
- 4With the ignition off, use a multimeter to check that the wires to the cylinder 2 injection valve have no break and no contact with ground or voltage.
- 5If you have a diagnostic tool, activate the cylinder 2 injection valve and listen for it working.
- 6If the fault remains, have a workshop check the cylinder 2 injection valve and its control.
Symptomer du kan merke4
- The engine may be hard to start, or not start at all, and this may be noticeable all the time or only now and then
- Yellow warning symbol and text message in the display
- The check engine lamp lights or behaves abnormally
- The engine lacks power or performs poorly
Hva feilen kan påvirke3
- Injection from cylinder 2 stops
- The engine speed is limited
- The car may go into limp home mode
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.