VOLVO
ECM-P158807 - Throttle Control Detected Loss Of Return Spring. General Failure Information. Mechanical Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The code is set when the engine control module (ECM), during an attempt to adapt the throttle body, detects that the throttle movement is blocked or that the return spring does not work correctly. The fault therefore lies in the throttle body or its connections. Although the code is named as a loss of return spring, the condition covers both the movement and the spring function.
Mulige årsaker
- The throttle sticks or is blocked, for example by oil film or dust
- Contact resistance or corrosion at the throttle body connector to the ECM
- Open circuit or short to ground or voltage in the wires to the throttle motor
- The wires to the throttle motor are shorted to each other
- Damaged throttle body
Hva du kan gjøre
- 1Check that nothing is blocking the throttle and that it does not stick. Have a workshop clean the throttle body if needed.
- 2With the ignition off, check the connectors at the throttle body and the engine control module for looseness, contact resistance and corrosion.
- 3With the ignition off, use a multimeter to check that the throttle motor wires have no break, no contact with ground or voltage, and are not shorted to each other.
- 4If you have a diagnostic tool, read the fault codes for the throttle and its control first, since they may be the cause.
- 5If the code returns, it points to a damaged throttle body, which a workshop can replace.
Symptomer du kan merke3
- The engine lacks power or performs poorly
- The check engine lamp lights or behaves abnormally
- A text message is shown in the display
Hva feilen kan påvirke1
- Depending on the nature of the fault, the power to the throttle motor may be switched off, so the throttle goes to its spring-return position
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.