Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P159364
    VOLVO

    ECM-P159364 - Cruise Control Monitor Fault. Algorithm Based Failures. Signal plausibility failure

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: D4204T5
    • Volvo V40 (2013–)2015Kun motor: D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: D4204T5

    Hva betyr feilkoden?

    The ECM confirms that it holds the data the cruise control needs, including from the steering wheel buttons and the transmission control module (TCM). The code is set when any of it is missing, or when the information is unreasonable, for example during excessive acceleration from low speed.

    Mulige årsaker

    • The cause may lie in the central electronics control module (CEM)
    • The cause may lie in the brake control module (BCM)
    • Short circuit between the CAN wires
    • Loose connections or contact resistance in the connections to the CAN network

    Hva du kan gjøre

    1. 1Check that the cruise control buttons on the steering wheel work and that nothing is stuck in them.
    2. 2Check that the gear selector can be engaged in the correct position and that no transmission fault is shown.
    3. 3Read the fault codes in the central electronics control module (CEM) and the brake control module (BCM), and correct them first.
    4. 4Check the connections to the CAN network for loose contacts and contact resistance.
    5. 5Do not work on the braking system yourself. Have a workshop check the brake control module if it has fault codes.

    Symptomer du kan merke1

    • The cruise control cannot be engaged

    Hva feilen kan påvirke1

    • The cruise control is switched off for as long as the fault is active

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.