VOLVO
ECM-P160801 - Watchdog Malfunction. General Failure Information. General electrical failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
Hva betyr feilkoden?
The engine control module (ECM) has restarted because of an informational code, which is event-driven. It does not show a fault in the control module where it is active. The engine control module monitors the signals from the control modules it communicates with, and once the code is registered it restarts.
Mulige årsaker
- The engine control module (ECM) has restarted
Hva du kan gjøre
- 1No specific troubleshooting exists for this code. It is an informational code
- 2Read off the fault codes and note whether any other codes are stored
- 3Check whether the cabin light and instrument lighting work as normal on the next drive
- 4If the fault code returns together with other faults: have a workshop read off the faults and assess them
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The cabin light may flicker and the instrument lighting may go out briefly
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.