VOLVO
ECM-P160888 - Watchdog Malfunction. Bus Signal / Message Failures. Bus off
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) has registered that its internal communication is incorrect. The code states bus off, which means the control module has temporarily stopped taking part in CAN communication.
Mulige årsaker
- Communication interference
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Read off the fault codes and note which are present before clearing any
- 2Clear the fault code, switch the ignition on and wait a while so the control module can run its test
- 3Check that the fault code is no longer active when the test has finished. If it is gone, the fault may have been temporary
- 4If the fault code returns: have a workshop replace the engine control module (ECM)
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.