Hva betyr feilkode ECM-P160948?

Diagnose og feilkodedefinisjon for ECM-P160948 (Volvo S80 (2007–), Volvo V70 (2008–), Volvo XC60 (2009–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P160948 - Diagnostic Lamp Driver. System Internal Failures. Supervision software failure

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

5 modeller

S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Vis modeller per årsmodell og motor (6)

Hva betyr feilkoden?

The engine control module (ECM) has registered an internal reset. The code may be stored after new software has been downloaded to the engine control module, and then there is no fault in the control module. The code is set because of the internal reset condition.

Mulige årsaker

The fault code may be stored after software has been downloaded

Hva du kan gjøre

1No specific troubleshooting exists for this code
2Read off the fault codes and note whether any other codes are stored
3If the code appeared after a software update of the engine control module, it may have been stored at that time. Have a workshop read off the code if you are unsure

Symptomer du kan merke1

No noticeable symptoms for the driver

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.