VOLVO
ECM-P161600 - Interactive Reprogramming Code - erase error, low voltage. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module (ECM) has registered that the voltage was too low while its internal processor was being reprogrammed. The fault therefore relates to a programming step, and the cause is given as a software fault. The engine may be difficult to start and may feel short of power.
Mulige årsaker
- Software fault in the engine control module (ECM)
Hva du kan gjøre
- 1Check the battery charge and that the battery terminals are tight and clean before any programming is done
- 2Read off the fault codes and note which are present
- 3Have a workshop reload the engine control module with the latest software and check that the fault code is gone
- 4After the reprogramming: switch the ignition on, start the engine and read off the fault codes again
Symptomer du kan merke2
- The engine is difficult to start
- The engine feels short of power
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.