VOLVO
ECM-P162917 - Internal Voltage Regulator. General Electrical Failures. Circuit voltage above threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) has detected that the voltage supply to its internal components is incorrect, here too high. The code therefore concerns the internal voltage regulator in the control module. The cause may be a fault in the charging system or a damaged engine control module.
Mulige årsaker
- Fault in the charging system
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Check the battery charge and that the battery terminals are tight and clean
- 2Read off the fault codes and note which are present before clearing any
- 3Clear the fault code, switch the ignition on and wait a while so the control module can run its test
- 4Check that the fault code is no longer active when the test has finished. If it is gone, the fault may have been temporary
- 5If the fault code returns: have a workshop replace the engine control module (ECM)
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.