VOLVO
ECM-P164200 - CAN Link Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The engine control module (ECM) has registered faults in the torque request from the brake control module (BCM), which is sent over the CAN link. The fault can lead to limited engine torque. The code is a general description and does not state what type of fault it is.
Mulige årsaker
- Faulty software
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Read off the fault codes, note which are present and clear the fault code
- 2Drive the car and read off the fault codes again afterwards. Check that the fault code is no longer active
- 3If the fault code returns: have a workshop check the software in the engine control module and replace the module if the fault remains
Symptomer du kan merke2
- A text message and a warning symbol appear in the display
- The engine performs poorly and lacks power while driving
Hva feilen kan påvirke1
- Engine torque may be limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.