VOLVO
ECM-P164604 - Linear O2 Sensor Control Chip (Bank 1). General Failure Information. System Internal Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Kun motor: B4164T
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Kun motor: B4164T
- Volvo V70 (2008–)2012–2015Kun motor: B4164T, B4164T2
Hva betyr feilkoden?
The control module (ECM) has logged an internal fault in its lambda sensor control, bank 1. The fault concerns the control module's own part of the lambda control.
Mulige årsaker
- A damaged engine control module (ECM)
Hva du kan gjøre
- 1Read off the fault codes and note which are present
- 2Check that the connectors and wiring to the lambda sensors are firmly seated and not chafed
- 3Clear the fault code, switch the ignition on and wait a while so the control module can run its test
- 4If the fault returns: have a workshop replace the engine control module (ECM)
Symptomer du kan merke1
- The check engine lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.