VOLVO
ECM-P164608 - Linear O2 Sensor Control Chip (Bank 1). General Failure Information. Bus Signal / Message Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Kun motor: B4164T
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Kun motor: B4164T
- Volvo V70 (2008–)2012–2015Kun motor: B4164T, B4164T2
Hva betyr feilkoden?
The control module (ECM) has logged an internal fault in its lambda sensor control, bank 1. Although the code is described as a bus or message fault, the condition concerns the control module's own function.
Mulige årsaker
- A damaged engine control module (ECM)
Hva du kan gjøre
- 1Inspect the wiring and connectors to the lambda sensors for damage and loose connections
- 2Read off the fault codes and note which are present before clearing any
- 3If the fault returns after the code has been cleared: have a workshop replace the engine control module (ECM)
Symptomer du kan merke1
- The check engine lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.