VOLVO
ECM-P164687 - Linear O2 Sensor Control Chip (Bank 1). Bus Signal / Message Failures. Missing message
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The control module (ECM) has logged an internal fault in its lambda sensor control, bank 1. Even though the code is described as a missing message, it is the control module's own function that applies.
Mulige årsaker
- A damaged engine control module (ECM)
Hva du kan gjøre
- 1Read off the fault codes and note which are present
- 2Check that the connectors on the engine control module are seated properly and clean
- 3If the fault code returns: have a workshop replace the engine control module (ECM)
Symptomer du kan merke1
- The emissions lamp is lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.