VOLVO
ECM-P165000 - Power Steering Pressure Switch Out Of Self Test Range. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module (ECM) calculates the desired torque and compensates for torque losses caused by the power steering. The fault code is set when the signal from the power steering pressure switch is outside its normal working range. On cars with hydraulic power steering, the switch measures the pressure in the steering system.
Mulige årsaker
- Contact resistance, oxidation or loose connections
- Open circuit, or short to earth, on the signal wire
- Signal wire short-circuited to voltage
Hva du kan gjøre
- 1Check that the fuses are intact. Their locations are given in the owner's manual
- 2On cars with hydraulic power steering: check that the connector to the pressure switch is firmly seated and free from oxide and corrosion
- 3On cars with hydraulic power steering: use a multimeter to check that the signal wire from the pressure switch has no break and no contact with earth or battery positive
- 4With a diagnostic tool on a car with hydraulic power steering, read the pressure switch signal in live data and see whether it changes as the wheel is turned
- 5If the fault code returns: have a workshop check the signal and replace the power steering pressure switch if needed
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.