VOLVO
ECM-P167500 - Injector data not programmed. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) must have calibration values for the injectors programmed so that they match the injectors' classification. The fault code is set when the control module detects a fault in the fuel quantity adjustment, meaning the IMA programming of the injectors.
Mulige årsaker
- IMA programming that failed or was interrupted
Hva du kan gjøre
- 1Read off the fault codes and note which are present
- 2If any programming of the engine control module has been interrupted or has not succeeded, that may be the cause of the fault code
- 3Have a workshop repeat the programming of the injector data in the engine control module
Symptomer du kan merke3
- The engine performs poorly and lacks power, especially when pulling away from standstill
- The engine hesitates, surges or runs unevenly while driving
- A text message and a warning symbol appear in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.