VOLVO
ECM-P167506 - Injector data not programmed. General Failure Information. Algorithm Based Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The injector data should be available to the engine control module, but the fault code is set when the control module can no longer read it over the LIN bus. The fault therefore concerns communication with the injectors and not the fuel itself.
Mulige årsaker
- LIN communication between the injector and the control module is not working
- Internal fault in the injector
Hva du kan gjøre
- 1Read off the fault codes and note whether any other codes are stored
- 2Check that the connectors to the injectors are firmly seated and clean
- 3If the fault code returns: have a workshop check the injector and the LIN wiring to it
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The control module uses the most recently used value from the injector
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.