VOLVO
ECM-P170300 - Brake Switch Out Of Self Test Range. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The fault is due to driver error: the brake pedal was pressed when the engine control module (ECM) carried out its self-test at ignition, or when it tested the brake pedal sensor at engine start. The code gives no further detail on the type of fault.
Mulige årsaker
- Driver error, with the brake applied during the engine control module self-test
Hva du kan gjøre
- 1Switch the ignition off, fully release the brake pedal and switch the ignition on again without pressing the brake
- 2Clear the fault code and read off the fault codes again after a short drive
- 3Check that the connectors at the brake pedal sensor are firmly seated and free from oxide
- 4Do not work on the brake system yourself. If the fault code returns: have a workshop check the brake pedal sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.