VOLVO
ECM-P170A00 - Clutch switch out of self test range. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
While driving, the ECM reads the clutch pedal sensor. The fault code is set when that signal is incorrect and does not move, meaning it does not change as it should.
Mulige årsaker
- Damaged clutch pedal sensor
Hva du kan gjøre
- 1Check that the fuses are intact. Their locations are given in the owner's manual
- 2Check that the clutch pedal moves freely and does not stick
- 3Check that the connectors at the clutch pedal sensor are firmly seated and free from oxide
- 4Clear the fault code and take the car for a drive. Read off the fault codes again afterwards
- 5If the fault code returns: have a workshop replace the clutch pedal sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.