VOLVO
ECM-P177487 - CAN Link Gear Shift Module / TCM. Bus Signal / Message Failures. Missing message
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) waits for the start lock signal from the transmission control module (TCM) over the CAN network, and the fault code is set if the signal does not arrive within a set time. The fault is probably linked to a more general CAN fault, which is often the cause of this code as well.
Mulige årsaker
- Fault on the CAN network
Hva du kan gjøre
- 1Read off the fault codes in the engine control module. If any of the codes ECM-U012088, ECM-U000188, ECM-U1A1400, ECM-U000108 or ECM-U000100 are stored, troubleshoot that one first
- 2Read off the fault codes in the transmission control module (TCM) and troubleshoot any codes there first
- 3Check that the connectors in the CAN network are firmly seated and free from oxide
- 4If the fault code returns after the other CAN faults have been fixed: have a workshop check the communication between the engine control module and the transmission control module
Symptomer du kan merke1
- Starting or autostart does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.