VOLVO
ECM-P193486 - Vehicle Speed Signal. Bus Signal / Message Failures. Signal invalid
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
6 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Kun motor: B4164T
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Kun motor: B4164T
- Volvo V70 (2008–)2012–2015Kun motor: B4164T, B4164T2
Hva betyr feilkoden?
The engine control module (ECM) compares the speed value from the transmission control module (TCM) with the value from the brake control module (BCM), which serves as the primary input. The code is set when the transmission control module's value has too low a quality, and The ECM uses the speed value, among other things, to control idle speed.
Mulige årsaker
- Faulty speed value from the transmission control module (TCM)
- Contact resistance in the CAN connections
- Open circuit in one or both CAN cables
Hva du kan gjøre
- 1Check whether communication-related CAN trouble codes are stored in other control modules and remedy them first, as they most likely lead to the cause
- 2Read off the trouble codes in the transmission control module (TCM) and remedy them, as it is the signal from there that is incorrect
- 3Check that the connectors in the CAN network are secure and free from corrosion, and twist and wiggle the cable harness where it can be reached to see whether communication drops out
- 4The fault may lie in another control module on the same CAN network. If the fault remains, have a workshop with diagnostic equipment identify which control module is communicating incorrectly
- 5If you have a diagnostic tool: compare the speed values from the BCM and TCM in live data during a test drive
Symptomer du kan merke1
- Check engine warning lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.