VOLVO
ECM-P193582 - Brake Switch/Sensor Signal. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) checks the brake pedal through two switches, the stop lamp switch and the brake pedal switch, which are integrated in the same component. The ECM also receives brake light information from the central electronic module (CEM) over the CAN network. Although the code is named alive or sequence counter, it applies when the signal over CAN is missing or the two switches do not agree on the pedal position.
Mulige årsaker
- Fault in the central electronic module (CEM)
- Contact resistance, oxidation or loose contact in the connector
- Open circuit or short circuit to ground or supply voltage in the wiring to the stop lamp switch or the brake pedal switch
Hva du kan gjøre
- 1Check the brake lights and the fuses for them
- 2Check that the connectors near the brake pedal and at the central electronic module are secure and free from oxidation
- 3Check that the brake light and the brake pedal position agree when the pedal is pressed and released, as this is what the control module compares
- 4If you have a diagnostic tool: read the trouble codes in the central electronic module and see whether any code relates to the brake light
- 5If the fault remains, have a workshop with diagnostic equipment check the central electronic module and the CAN communication.
- 6If the brake pedal behaves abnormally, have the car checked by a workshop before it is driven further
Symptomer du kan merke2
- Red warning symbol and text message shown in the driver information display
- Cruise control cannot be engaged
Hva feilen kan påvirke1
- Cruise control is switched off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.