VOLVO
ECM-P200600 - Intake Manifold Runner Control Stuck Closed (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (16)
- Volvo S80 (2007–)2007–2009Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012–2015Kun motor: B6324S4, B6324S5
- Volvo V70 (2008–)2008–2009Kun motor: B6324S
- Volvo V70 (2008–)2010Kun motor: B6324S, B6324S2
- Volvo V70 (2008–)2011–2014Kun motor: B6324S5
- Volvo XC60 (2009–)2010Kun motor: B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015Kun motor: B6324S4, B6324S5
- Volvo XC70 (2008–)2008–2009Kun motor: B6324S
- Volvo XC70 (2008–)2010Kun motor: B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6324S4, B6324S5
- Volvo XC90 (2003–)2005–2006Kun motor: B8444S
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module (ECM) controls the variable intake system dampers through a control valve that drives the vacuum motor, and reads the intake air pressure sensor to judge whether the system works. The code is set when the upper primary throttle unit is detected closed, that is, when the dampers have jammed in the closed position.
Mulige årsaker
- Damaged control valve
- Vacuum hoses disconnected from their connections
- Leaking or blocked vacuum hoses
- Sticking damper
- Damaged vacuum motor
- Damaged primary throttle unit (upper)
Hva du kan gjøre
- 1Make sure every vacuum hose is properly attached to the control valve, the vacuum tank and the vacuum motor
- 2Listen for leaks and check that the hoses are not blocked
- 3Check that the dampers can move freely and that nothing is blocking them
- 4If you have a diagnostic tool: activate the upper primary actuator and check that it moves
- 5If the fault remains, have a workshop with diagnostic equipment check the control valve and the vacuum motor
Symptomer du kan merke3
- The car performs worse
- The car lacks power, especially at take-off
- The engine hesitates, surges or runs unevenly during acceleration, deceleration or steady speed
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.