VOLVO
ECM-P200800 - Intake Manifold Runner Control Circuit/Open (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) watches the output of the control module's internal power stage that drives the swirl damper motor. The code is set when that signal is incorrect, which may be caused by an open circuit in the signal cable or a damaged swirl damper motor.
Mulige årsaker
- Open circuit on the signal cable
- Damaged swirl throttle motor
Hva du kan gjøre
- 1Check the signal cable to the swirl damper motor for an open circuit with a multimeter
- 2If you have a diagnostic tool: activate the swirl damper motor and check that it responds to the command
- 3Check that the connectors to the swirl damper motor are secure and free from oxidation
- 4If the fault remains, have a workshop with diagnostic equipment check the swirl damper motor and its signal cable
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.