VOLVO
ECM-P200977 - Intake Manifold Runner Control Circuit Low (Bank 1). Mechanical Failures. Commanded position not reachable
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) checks how the swirl damper motor works. Although the code is named commanded position not reachable, it applies when the learning of the swirl damper motor's closed end position has failed. The code is only tested after a drive, once the test conditions are met.
Mulige årsaker
- Defective swirl damper motor
- The swirl damper is jammed or has stuck
Hva du kan gjøre
- 1Check that the swirl damper can move freely and has not stuck in its end position
- 2After a drive, use a diagnostic tool, if you have one, to check whether the code is active
- 3Check that the connectors to the swirl damper motor are secure and free from oxidation
- 4If the fault remains, have a workshop check the swirl damper motor and carry out a new learning of the closed end position
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.