VOLVO
ECM-P200A00 - Intake Manifold Runner Performance - Bank 1. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) compares the swirl damper position with a calculated value and sets the code when the position is wrong. The code therefore concerns the position of the swirl damper itself, and it is tested with the engine running.
Mulige årsaker
- Damaged swirl throttle motor
Hva du kan gjøre
- 1If you have a diagnostic tool: compare the swirl damper position in live data with the engine running, and check that it follows the command
- 2Check that the swirl damper and its linkage can move freely
- 3Check that the connectors to the swirl damper motor are secure and free from oxidation
- 4If the fault remains, have a workshop with diagnostic equipment check the swirl damper motor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.