VOLVO
ECM-P201000 - Intake Manifold Runner Control Circuit High (Bank 1). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The ECM follows the swirl damper motor. Although the code is named circuit high, it applies to the signal from the learning of the swirl damper motor's open end position, which is incorrect. The fault can only be detected once the test has started and a drive has been made.
Mulige årsaker
- The swirl damper jams or has stuck
- Defective swirl damper motor
- Damaged swirl damper arm
- The end stop for the swirl damper is damaged
Hva du kan gjøre
- 1Check that the swirl damper moves freely and is not jammed
- 2Look over the swirl damper arm and end stop for damage and loose parts
- 3If you have a diagnostic tool: activate the swirl damper motor and see whether it reaches its open end position
- 4If the fault remains, have a workshop check the swirl damper motor and carry out a new learning of the open end position
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.