VOLVO
ECM-P201077 - Intake Manifold Runner Control Circuit High (Bank 1). Mechanical Failures. Commanded position not reachable
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) checks the swirl damper motor and whether it can reach its open end position. The code is set when the learning of the open end position has failed, and it is tested after a drive.
Mulige årsaker
- Defective swirl damper motor
- The swirl damper jams or has stuck
Hva du kan gjøre
- 1Check that the swirl damper is not jammed or stuck in the open position
- 2If you have a diagnostic tool, you can read whether the code is active after a drive
- 3Make sure the connectors at the swirl damper motor are intact and free from corrosion
- 4If the fault remains, have a workshop with diagnostic equipment check the swirl damper motor and the end position
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.