VOLVO
ECM-P201312 - Intake Manifold Runner Control Circuit High (Bank 2). General Electrical Failures. Circuit short to battery
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The code relates to a short circuit to supply voltage on the signal cable to the bank 2 swirl damper motor. The engine control module monitors the signal and sets the code when it is incorrect, which may happen when the cable is in contact with battery voltage.
Mulige årsaker
- Signal cable short-circuited to supply voltage
- Open circuit in the signal cable
- Damaged swirl throttle motor
- Swirl damper motor sticking
- Linkage or swirl damper sticking
- Trouble code ECM-P201211 can cause this code
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have a diagnostic tool, read the status of the code with the ignition on and see whether it returns
- 3Use a multimeter to check that the signal cable has no contact with voltage
- 4Check that the cable is not pinched or chafed
- 5If the fault remains, have a workshop check the swirl damper motor and its signal cable
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.