Hva betyr feilkode ECM-P201500?

Diagnose og feilkodedefinisjon for ECM-P201500 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P201500 - Intake Manifold Runner Position Sensor/Switch Circuit Range/Perf. (Bank 1). General Failure Information. No sub type information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

9 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Vis modeller per årsmodell og motor (14)

Hva betyr feilkoden?

The ECM runs a learning routine for the swirl damper position, and the code is set when that routine is judged incorrect. It can also be set when the damper reaches its position too slowly and deviates from the calculated position. The learning is checked with the engine switched off, while the comparison with the calculated position is made with the engine running.

Mulige årsaker

Linkage or swirl damper sticking
Damaged linkage between the swirl throttle motor and the swirl duct
Swirl throttle motor sticking
Defective swirl damper motor

Hva du kan gjøre

1Check whether the arm between the swirl motor and the swirl duct has come loose
2Check that the linkage and the swirl duct move freely and are not damaged
3Check that the swirl throttle motor is not sticking and is not damaged
4If you have a diagnostic tool: read the swirl damper position in live data with the engine running and check that it follows the calculated position
5Clear the code only once the mechanics have been checked, then see whether it returns

Symptomer du kan merke1

No noticeable symptoms for the driver

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.