VOLVO
ECM-P201561 - Intake Manifold Runner Position Sensor/Switch Circuit Range/Perf. (Bank 1). Algorithm Based Failures. Signal calculation failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The code concerns an incorrect calculation made during the adaptation of the swirl damper position. The engine control module sets it when that adaptation is judged wrong, and the test is made with the engine switched off.
Mulige årsaker
- Linkage or swirl damper sticking
- Damaged linkage between the swirl throttle motor and the swirl duct
- Swirl throttle motor sticking
Hva du kan gjøre
- 1Check whether the link arm to the swirl duct has come loose
- 2Check that the swirl damper linkage and swirl duct are not sticking or damaged
- 3Check that the swirl throttle motor is not sticking or damaged
- 4Clear the code only once the mechanics have been checked, then see whether it comes back
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.