VOLVO
ECM-P201900 - Intake Manifold Runner Position Sensor/Switch Circuit (Bank 2). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM checks whether the swirl throttle has reached its end positions. The code is set when that check fails, and the test is made with the engine switched off.
Mulige årsaker
- Control arm has come loose from the swirl damper motor or the swirl damper duct
- Damaged linkage between the swirl throttle motor and the swirl throttle duct
Hva du kan gjøre
- 1Check that the link arm to the swirl duct is still attached to the swirl damper motor
- 2Look for damage to the linkage between the swirl damper motor and the swirl duct
- 3Make sure the swirl damper motor moves easily and is not damaged
- 4Clear the code only once the linkage has been checked and remedied
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.