VOLVO
ECM-P208062 - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1. Algorithm Based Failures. Signal compare failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM watches exhaust system temperature and sets the code when the signal from the sensor is wrong, meaning the value it reports does not match what the ECM expects. The cause is either in the wiring or in the sensor itself.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- Damaged temperature sensor at the catalytic converter
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Use a multimeter to check that the sensor wiring has no open circuit
- 3Look for contact resistance or oxidation in the sensor's connector
- 4If you have a diagnostic tool: see in live data whether the sensor value follows the engine warming up
- 5If the fault remains, have a workshop measure the sensor resistance and repair the wiring as needed
Symptomer du kan merke2
- The car runs with poor performance and lacks power
- The engine hesitates, surges or runs unevenly, especially during acceleration
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.