VOLVO
ECM-P208421 - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 2. General Signal Failures. Signal too low
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code is set when the sensor after the catalytic converter reads a value that differs from the calculated one. The engine control module monitors this while the engine is running.
Mulige årsaker
- Loose connection or oxidation in the connections
- Short circuit to ground in the signal wire
- Damaged exhaust temperature sensor after the catalytic converter
Hva du kan gjøre
- 1If you have a diagnostic tool: start the engine and read the sensor value in live data, and check that it is steady
- 2Check that the connectors to the sensor after the catalytic converter are secure and free from oxidation
- 3Use a multimeter to check that the signal wire has no short circuit to ground
- 4Check that the sensor wiring is not chafed or pinched
- 5If the fault remains, have a workshop measure the sensor resistance and replace the sensor if needed
Symptomer du kan merke1
- Check engine warning lamp lights or behaves abnormally
Hva feilen kan påvirke1
- A calculated value is used instead of the sensor signal
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.