Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P210000
    VOLVO

    ECM-P210000 - Throttle Actuator Control Motor Circuit /Open. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
    • Volvo S80 (2007–)2010–2011Kun motor: D4164T
    • Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
    • Volvo V70 (2008–)2010–2011Kun motor: D4164T
    • Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
    • Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
    • Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5

    Hva betyr feilkoden?

    The ECM drives the throttle motor through its internal power stage and monitors the inlet control valve. The code is set when the ECM detects a fault in controlling the throttle motor or in the PWM signal to the inlet control valve, or when the output stage inside the ECM becomes too hot.

    Mulige årsaker

    • Open circuit on the signal wire
    • Signal wires short-circuited
    • Damaged throttle unit
    • Contact resistance or oxidation in the connectors
    • Overheated throttle unit
    • Open circuit in the power supply

    Hva du kan gjøre

    1. 1Check that the fuses are intact
    2. 2Use a multimeter to check that the wiring to the throttle unit has no open circuit or short circuit
    3. 3Check that the connectors to the throttle unit are secure and free from oxidation
    4. 4If you have a diagnostic tool: read the code status with the ignition on and check whether the fault is still active
    5. 5If the fault remains, have a workshop check the throttle unit and its control

    Symptomer du kan merke4

    • The car runs with poor performance and lacks power
    • The engine hesitates, surges or runs unevenly during acceleration, deceleration or steady speed
    • Check engine warning lamp lights or behaves abnormally
    • Warning symbol and text message shown in the driver information display

    Hva feilen kan påvirke1

    • Engine torque may be limited

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.