VOLVO
ECM-P21001D - Throttle Actuator Control Motor Circuit /Open. General Electrical Failures. Circuit current out of range
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module drives the throttle motor through internal power stages. The code is set when the module detects a fault in that control, where the current to the throttle motor is outside its normal range. The fault belongs to the electrical control of the throttle unit.
Mulige årsaker
- Open circuit in the signal wire to the throttle motor
- The signal wires are short-circuited
- Damaged throttle unit
Hva du kan gjøre
- 1Check that the fuses for the engine control system are intact
- 2Read the code, note it, clear it and test drive to see whether it returns
- 3Check the connectors at the throttle unit and at the engine control module for loose connections, corrosion and oxidation
- 4Look for chafing, pinching and breaks in the wiring to the throttle unit, and use a multimeter to confirm it has no contact with ground or supply voltage
- 5If the code returns, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.