VOLVO
ECM-P210041 - Throttle Actuator Control Motor Circuit /Open. System Internal Failures. General checksum failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module has found an internal checksum error in the control of the throttle motor. It is classed as an internal system fault and is checked with the ignition on. The code shows that something in the control does not match, but it does not point to one particular part.
Mulige årsaker
- Contact resistance or oxidation in the connectors
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read the code with the ignition on and see whether it is still active
- 3Check the connectors at the throttle unit and at the engine control module for loose connections and oxidation
- 4After any work, read the code again to confirm that it has cleared
- 5If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.