VOLVO
ECM-P210100 - Throttle Actuator "A" Control Motor Circuit Range/Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The engine control module checks the throttle position using the feedback from the throttle unit. The code is set when that feedback shows the throttle position does not change even though the module is regulating it. It concerns throttle actuator A, and the code gives no more specific fault type.
Mulige årsaker
- The throttle unit motor receives no supply voltage
- A fault in the fuses for the engine control module
- The throttle sticks or is blocked, for example by oil film, dust or ice
- The throttle unit is incorrectly adapted
- Damaged throttle unit
Hva du kan gjøre
- 1Check that the fuses for the engine control system are intact
- 2With the ignition on: read the throttle position in live data and check that the value is reasonable as you press the accelerator to different positions
- 3With the ignition off: make sure nothing is blocking the throttle, and gently press the throttle plate to see whether it sticks
- 4Clean the throttle unit if needed, and check the connectors for loose connections and oxidation
- 5An incorrect adaptation value can cause it. To reset, briefly disconnect the battery pole, reconnect it and hold the ignition in position II for a while
- 6If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptomer du kan merke5
- Check engine light comes on or behaves abnormally
- Engine lacks power, especially when moving off
- Engine hesitates or jerks during acceleration or deceleration
- Idle speed is too high, even when not accelerating
- Cruise control will not engage
Hva feilen kan påvirke2
- Cruise control is switched off while the fault is active
- The supply to the throttle unit is cut off, so the throttle plate turns to its spring-loaded position
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.