VOLVO
ECM-P210200 - Throttle Actuator Control Motor Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (14)
- Volvo S60 (2011–)2011Kun motor: D5204T2
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010Kun motor: D4164T
- Volvo S80 (2007–)2011Kun motor: D4164T, D5204T2
- Volvo V60 (2011–)2011Kun motor: D5204T2
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010Kun motor: D4164T
- Volvo V70 (2008–)2011Kun motor: D4164T, D5204T2
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC60 (2009–)2011Kun motor: D5204T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2011Kun motor: D5204T2
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module drives the throttle motor with a PWM signal through an internal power stage, and it also monitors the intake control valve. The code is set when the PWM signal is too low, for example to the intake control valve. The fault is general and has no more specific fault type, and it is checked with the ignition on.
Mulige årsaker
- The signal wire is short-circuited to ground
- Damaged throttle unit
- Damaged intake control valve
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read the code with the ignition on and see whether it is still active
- 3Look for chafing on the signal wire to the throttle unit, especially where it may have touched the vehicle body
- 4Use a multimeter to confirm the signal wire has no contact with ground (the vehicle body)
- 5Check that the connectors at the throttle unit and the engine control module are secure and free from corrosion
- 6If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the intake control valve
Symptomer du kan merke5
- Poor performance
- The engine lacks power, even when moving off from a standstill
- The engine hesitates or jerks during acceleration, deceleration or at steady speed
- The Check engine light comes on or behaves abnormally
- A text message and a warning symbol appear in the display
Hva feilen kan påvirke1
- Engine torque may be limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.