VOLVO
ECM-P210704 - Throttle / Pedal Position Sensor A Minimum Stop Performance. General Failure Information. System Internal Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (12)
- Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4204T7
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4204T7
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4204T7
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
This code concerns the signal from the throttle position sensor, more precisely the first potentiometer in the electronic throttle unit. It is set when, during an adaptation attempt, the engine control module finds an internal fault in the amplifier for that signal. The fault therefore lies in the control module, which then ignores the signal from that sensor.
Mulige årsaker
- Damaged engine control module
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read the code with the ignition on and note it down
- 3If you have a diagnostic tool, check that the throttle position appears in live data when the accelerator is pressed and released
- 4If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The engine control module does not use the signal from the first potentiometer in the throttle position sensor
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.