Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P211297
    VOLVO

    ECM-P211297 - Throttle Actuator Control System - Stuck Closed. Component Failures. Component or system operation obstructed or blocked

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    S60 (2011–), S80 (2007–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2012Kun motor: B5254T5
    • Volvo S80 (2007–)2007–2008Kun motor: B5254T6
    • Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Kun motor: B5254T10
    • Volvo V70 (2008–)2008Kun motor: B5254T6
    • Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Kun motor: B5254T10

    Hva betyr feilkoden?

    The engine control module has noticed that the throttle is blocked during an adaptation attempt, or that the opening spring does not work as it should. It is a component fault in which something is stopping the throttle.

    Mulige årsaker

    • The throttle sticks or is blocked, for example by oil film or dust
    • Contact resistance or oxidation in the connections between the engine control module and the throttle unit
    • An open circuit, or a short to ground or supply voltage, in the wiring to the throttle motor
    • The wires to the throttle motor are shorted to each other
    • Damaged throttle unit

    Hva du kan gjøre

    1. 1Read the codes in the control module first and fix any that are stored
    2. 2Check that the fuses are intact
    3. 3With the ignition off, check that the throttle is not sticking or blocked by dirt or an object, and clean the throttle unit if needed
    4. 4Check the connectors at the throttle unit and the engine control module for loose connections and oxidation
    5. 5Use a multimeter to check that the throttle motor wires have no contact with ground or supply voltage
    6. 6If the fault remains, have a workshop with diagnostic equipment decide whether the throttle unit needs replacing

    Symptomer du kan merke2

    • The malfunction indicator lamp lights up
    • Poor performance

    Hva feilen kan påvirke1

    • Depending on the fault, the control module can cut the supply to the throttle motor, and the throttle then heads for its spring-loaded position

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.