VOLVO
ECM-P211975 - Throttle Actuator Control Throttle Body Range/Performance. Mechanical Failures. Emergency position not reachable
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (27)
- Volvo S60 (2011–)2011Alle motorer unntatt: B6304T4, D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: B4164T, B4164T2, B4164T3, B4204T7, B5254T5
- Volvo S60 (2011–)2013–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010Kun motor: B4204T6, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B4164T, B4164T2, B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010Kun motor: B4204T6, B5254T10, B5254T11
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7, B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B4164T, B4164T2, B4204T7, B5254T10
- Volvo V70 (2008–)2013–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
During an adaptation attempt, the engine control module has found that the throttle angle in its return end position lies outside the programmed limit. The fault is mechanical, so the throttle cannot reach its emergency position.
Mulige årsaker
- The throttle sticks or is blocked, for example by oil film or dust
- Poor contact or oxidation between the control module and the throttle unit
- Damaged throttle unit
Hva du kan gjøre
- 1Check that the throttle is not sticking or blocked by dirt or an object, and clean the throttle unit if needed
- 2With the ignition off, check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
- 3With the ignition off, turn the throttle gently by hand and let it go. If the return spring does not bring it back, the throttle unit is damaged
- 4Have a workshop carry out the throttle adaptation, since this fault can affect the adaptation values
- 5If the fault remains, have a workshop decide whether the throttle unit needs replacing
Symptomer du kan merke3
- The engine lacks power and performs poorly
- Uneven idle
- The Check engine light comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.