VOLVO
ECM-P211977 - Throttle Actuator Control Throttle Body Range/Performance. Mechanical Failures. Commanded position not reachable
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
With the engine running, the engine control module has noticed that the desired throttle position (the set value) and the actual throttle position (the measured value) do not match. The fault may be mechanical, but it can also come from poor contact or a wiring fault.
Mulige årsaker
- The throttle sticks or is blocked, for example by oil film or dust
- Contact resistance or oxidation in the connections between the control module and the throttle unit
- An open circuit, or a short to ground or supply voltage, in the wiring to the throttle motor
- The wires to the throttle motor have shorted to each other
- Damaged throttle unit
Hva du kan gjøre
- 1Read the codes in the control module first. Codes for the throttle unit, the position sensor and the control module must be dealt with first
- 2Check that the throttle is not sticking or blocked, and clean the throttle unit if needed
- 3Check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
- 4Look for breaks and chafing in the wiring to the throttle motor, and use a multimeter to check that it is not shorted to ground, supply voltage or other wires
- 5If the code comes back, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Symptomer du kan merke1
- Uneven idle
Hva feilen kan påvirke1
- The throttle motor receives no supply, and the throttle is turned to its spring-loaded position
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.