VOLVO
ECM-P212038 - Throttle/Pedal Position Sensor/Switch D Circuit. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency incorrect
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (31)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo S80 (2007–)2011–2012Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Kun motor: B4204T11, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
Although the code is named throttle and pedal position sensor, it concerns the accelerator pedal sensor. The engine control module has registered an incorrect frequency on the PWM signal from the sensor, and it compares that PWM signal with the analogue signal that arrives over CAN.
Mulige årsaker
- Loose connections or contact resistance in the connections on the PWM signal wire
- Interference on the PWM signal wire
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1Check that the fuses are intact
- 2With the ignition off, go through the connectors at the pedal sensor and the engine control module, and look for loose connections and oxidation
- 3Check that the ground wire to the pedal sensor has no break
- 4With the ignition on, use a multimeter to check that the supply voltage to the sensor is normal battery voltage
- 5If you have a diagnostic tool, read the pedal position in live data while pressing and releasing the pedal slowly, and check that the values follow the pedal
- 6If the fault remains, have a workshop with diagnostic equipment check the pedal sensor and its wiring
Symptomer du kan merke3
- A text message and a warning symbol appear in the display
- A message appears in the information display
- The accelerator pedal is ignored during braking
Hva feilen kan påvirke3
- The control module uses the analogue signal sent over CAN
- The pedal position that corresponds to the released pedal is used when the brake pedal is pressed at the same time
- Driveability suffers when the fault remains for an extended time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.